|
 |
|
|
|
|
|
|
|
1. Primers & Additives
|
Penetrating Primer
(White - Clear) (68120 - 68110)
Penetrating Primer is a highly developed product in liquid form, which is
absorbed deeply into the substrate of cementitious materials, plasters and
limes. It binds the substrate and the surface, to give a solid base for
decorative finishing coats,
Terrabond A (68210)
Terrabond A is versatile bonding agent for use with all cementious materials,
lime washes, plasters, etc. It can be used to pre-treat substrata as an
adhesion-promoting agent and as a primer / sealer for decorative coatings.
Terrabond A is a highly concentrated product. It increases the compressive,
tensile and flexural strengths of mortars and reduces the water / cement ratio.
Terrabond A can be used on all exterior and interior surfaces.
Terrabond P
Terrabond P is a cost-effective, universal bonding agent. It is designed as an
additive for concrete, plasters, gypsum plasters and ceramic adhesives.
Terrabond P can be used for pre-treatment of substrates as an
adhesion-promoting agent, to form a strong bond between cement and a variety of
substrates, without the need for mechanical preparation of the surface. It can
also be used as a primer/sealer for decorative coatings. preventing
efflorescence from reaching the surface and debonding the final finish.
Terrabond SBR (66230)
Terrabond SBR is a versatile bonding agent and admixture for use with
cementitious materials. It is used to improve adhesion and strength of
cementitious compounds. It is also widely used to produce waterproof mortars
and slurries. Terrabond SBR is very economical in use.
Epiprime ZR (part 1 - part 2 - solvent) (68430 - 68431 -
68432)
Epiprime ZR is a two component metallic zinc rich epoxy primer designed to
provide excellent corrosion resistance to steel reinforcing bars used in
concrete. Epiprime ZR forms an integral part of the TERRACO concrete repair
system.
Silprime (68180)
Silprime is a silane siloxane based penetrating primer for concrete surfaces.
It binds the substrate to give a solid base for decorative finishing coats.
When it penetrates into the substrate, it creates a hydrophobic zone into which
liquid water cannot enter, thereby preventing efflorescence from reaching the
surface and debonding the final finish.
|
|
|
|
|
© All rights reserved 2005 Terraco Group
|
|
|
