|
 |
|
 |
|
|
|
 |
|
|
5. Mortar and Screed
|
Terramix
Terramix is formulated for plastering and repair of cast in-situ concrete,
lightweight concrete, fairfaced dense concrete, blockwork and brickwork. It can
be used on exterior and interior surfaces to give a hard, smooth, water
resistant finish which is suitable for painting and wall papering. Terramix is
both hydraulically and organically bound guaranteeing good adhesion to the
substrate. Terramix is available in three grades, Coarse, Standard and Fine,
and in two colours , grey and white.
Styrobond DP
Styrobond DP is a basecoat and adhesive for the TERRACO exterior insulating
finishing system. It is easy to use by just adding water, improving on-site
quality control. It shows excellent adhesion between substrate and expanded
polystyrene boards when used as an adhesive. It also provides an excellent
basecoat for embedding glass fibre mesh on top of which EIFS finishing coat is
applied
Cemadmix (78110)
Cemadmix is an extremely versatile additive for use with cementitious
materials, lime washes, plasters, etc.
Cemadmix is a highly concentrated and economical to use product, specifically
developed for use in tropical conditions. It increases the adhesive, tensile
and flexural strengths of mortars. CemAdmix greatly enhances the application
characteristics of plasters, mortars and cement based tile adhesives. CemAdmix
can be used with confidence on all exterior and interior surfaces.
|
|
 |
|
© All rights reserved 2005 Terraco Group
|
|